Firewall (UTM) [FortiGate] Port forwarding configuration example [Destination NAPT]
Work environment
FortiGate-VMversion 7.0.5
Port forwarding example
As shown in the figure below, configure th...
Firewall (UTM)
Firewall (UTM) Firewall (UTM) [FortiGate] Save and check firewall logs
Work environment
FortiGate-60Eversion 7.2.1
Save firewall logs
FortiGate sets whether to save traffic logs for...
Firewall (UTM) About nslookup on FortiGate [name resolution]
Work environment
FortiGate-60Eversion 7.2.1
"nslookup" on FortiGate
There is an nslookup command that can be u...
Firewall (UTM) [FortiGate] How to configure link aggregation
Work environment
FortiGate-60Eversion 7.0.6
Link Aggregation in FortiGate
Link aggregation can be configured w...
Firewall (UTM) [FortiGate] How to configure HA (high availability)
Work environment
FortiGate-VMversion 7.0.5
What is HA (High Availability)?
HA is a redundant configuration usi...
Firewall (UTM) [FortiGate] Mastering the config display command of CLI
Work environment
FortiGate 60Eversion 7.0.5
View config in CLI
When configuring the FortiGate, we often view t...
Firewall (UTM) [Check Point R81] Precautions when changing the IP address of SNMP Agent Interfaces
Target environment
Check Point version R81
IP address change for SNMP Agent Interfaces
When setting up SNMP, s...
Firewall (UTM) [Check Point R81] Trap user settings are required to send link down/up SNMP traps
Target environment
Check Point version R81
Link down/up SNMP trap transmission settings
If you want to send li...
Firewall (UTM) [Check Point R81] What is Master expire in VRRP?
Target environment
Check Point Gaia OS R81 Gateway
Check the status of VRRP
There is show vrrp interfaces as a...
Firewall (UTM) [Check Point R81] How to investigate the cause of packet drops
Target environment
Check Point Gaia OS R81 Gateway
How to check the drop log
How can we investigate the cause ...