[Cisco] Firepower(ASA) Configuration Tips

Firewall (UTM)

Interface

  • Loopback Interface cannot be configured on ASA.

Failover

  • If you use one interface as Failover link and Stateful failover link, you must configure the same interface name.
    • failover lan interface <name> GigabitEthernet1/1
      failover link <name> GigabitEthernet1/1
  • ASA Failover syncs the configuration, including the hostname. In other words, the host name of the Primary device and the Secondary device will be the same.


Comments

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

タイトルとURLをコピーしました